1:18 KITT
Moderators: neps, Matthew, Michael Pajaro
- andy-kitt
- FLAG Assistant
- Posts: 506
- Joined: Sun May 29, 2005 12:14 pm
- What year did the original Knight Rider start: 0
- Location: Norwich, UK
Re: 1:18 KITT
Have a guess, take a close look at the pictues.Mathyus wrote:good luck on that. How did you do that front scanner?
Re: 1:18 KITT
very creative stuff
Re: 1:18 KITT
Andy,andy-kitt wrote:You have to remove the dash from the car and then with a small handtool sander, sand away the vents, but don't go too far otherwise you'll end up with holes.
Removing Shelby requires gentle paint cutting compound & re-polish, care needs to be taken just to remove the letters and not cut throught the paint. The rear on the matt black you need to repaint, otherwise you'll remove the matt black stripes.
I failed to remove the vent with a sander. What kind of tool sander did you use? Can you show me a picture of the tool?
Thanks.
Cheers
- andy-kitt
- FLAG Assistant
- Posts: 506
- Joined: Sun May 29, 2005 12:14 pm
- What year did the original Knight Rider start: 0
- Location: Norwich, UK
Re: 1:18 KITT
You need hand hend circular saws like this http://cgi.ebay.co.uk/CIRCULAR-SAW-SET- ... 240%3A1318" onclick="window.open(this.href);return false;
Although this is for wood/plastic it gives you the idea of what I mean.
Although this is for wood/plastic it gives you the idea of what I mean.
Re: 1:18 KITT
Alright, thanks.andy-kitt wrote:You need hand hend circular saws like this http://cgi.ebay.co.uk/CIRCULAR-SAW-SET- ... 240%3A1318" onclick="window.open(this.href);return false;
Although this is for wood/plastic it gives you the idea of what I mean.
Cheers