knight rider online

Posted: **Tue Jan 20, 2009 3:29 pm**

good luck on that.

How did you do that front scanner?

Posted: **Wed Jan 21, 2009 10:18 am**

Mathyus wrote:good luck on that. How did you do that front scanner?

Have a guess, take a close look at the pictues.

Posted: **Sun Feb 08, 2009 2:27 am**

very creative stuff

Posted: **Sat Feb 14, 2009 4:40 am**

andy-kitt wrote:You have to remove the dash from the car and then with a small handtool sander, sand away the vents, but don't go too far otherwise you'll end up with holes.

Removing Shelby requires gentle paint cutting compound & re-polish, care needs to be taken just to remove the letters and not cut throught the paint. The rear on the matt black you need to repaint, otherwise you'll remove the matt black stripes.

Andy,

I failed to remove the vent with a sander. What kind of tool sander did you use? Can you show me a picture of the tool?

Thanks.

Posted: **Sun Feb 15, 2009 8:54 am**

You need hand hend circular saws like this http://cgi.ebay.co.uk/CIRCULAR-SAW-SET- ... 240%3A1318" onclick="window.open(this.href);return false;
Although this is for wood/plastic it gives you the idea of what I mean.

Posted: **Thu Feb 19, 2009 12:42 am**

andy-kitt wrote:You need hand hend circular saws like this http://cgi.ebay.co.uk/CIRCULAR-SAW-SET- ... 240%3A1318" onclick="window.open(this.href);return false;
Although this is for wood/plastic it gives you the idea of what I mean.

Alright, thanks.

knight rider online

1:18 KITT

Re: 1:18 KITT

Re: 1:18 KITT

Re: 1:18 KITT

Re: 1:18 KITT

Re: 1:18 KITT

Re: 1:18 KITT