KR Rep for Sale
Moderators: neps, Matthew, Michael Pajaro
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
KR Rep for Sale
Hi all,
Well I am at the stage where i really don't have the time to finish it so I have made the tough choice to sell it.
It's a 2006 Mustang GT Auto with the red leather interior.
I brought the complete GT500 kit from FORD -
Front and rear bumpers, lights, spoiler, splitter, grille, badges etc
The hood is Trufiber
The scanner is from Creative Indulgence and pre-wired but not completed installing the scanner yet. The voice Orb from Joshua and is installed with wires easily assessable under glove box ready to hook up to a car pc which i don't have yet.
I located a set of GT 500 KR side stripes which look great.
I also changed the exhaust to make it sound right
I brought the 20" wheels new from Shelby late last year and they arrived in December. The wheels are not fitted yet and are still in my living room in the boxes they came in. It's currently sitting on the original GT wheels.
So to finish this project all you need is-
Install the stripes over the top of the car (hood, roof, trunk and bumpers)
Buy a car pc and pretty much plug and play.
Fit the scanner to the hood and plug in the wires (it's already wired so just need connecting)
Buy some tires and fit the Shelby wheels
The whole car was completely resprayed in November 2012, looks awesome!
Lastly, get the seat upholstered to be show accurate (or buy a new set)
This project has had no expense spared so far but it's been sat there a few month now doing nothing. It would make a ideal buy for someone who doesn't want to go through locating parts, installing them.
If i remember anything else, I will add later!
Any questions, please contact me - mark.takhar@gmail.com
Thanks
Well I am at the stage where i really don't have the time to finish it so I have made the tough choice to sell it.
It's a 2006 Mustang GT Auto with the red leather interior.
I brought the complete GT500 kit from FORD -
Front and rear bumpers, lights, spoiler, splitter, grille, badges etc
The hood is Trufiber
The scanner is from Creative Indulgence and pre-wired but not completed installing the scanner yet. The voice Orb from Joshua and is installed with wires easily assessable under glove box ready to hook up to a car pc which i don't have yet.
I located a set of GT 500 KR side stripes which look great.
I also changed the exhaust to make it sound right
I brought the 20" wheels new from Shelby late last year and they arrived in December. The wheels are not fitted yet and are still in my living room in the boxes they came in. It's currently sitting on the original GT wheels.
So to finish this project all you need is-
Install the stripes over the top of the car (hood, roof, trunk and bumpers)
Buy a car pc and pretty much plug and play.
Fit the scanner to the hood and plug in the wires (it's already wired so just need connecting)
Buy some tires and fit the Shelby wheels
The whole car was completely resprayed in November 2012, looks awesome!
Lastly, get the seat upholstered to be show accurate (or buy a new set)
This project has had no expense spared so far but it's been sat there a few month now doing nothing. It would make a ideal buy for someone who doesn't want to go through locating parts, installing them.
If i remember anything else, I will add later!
Any questions, please contact me - mark.takhar@gmail.com
Thanks
- krkitt1
- FLAG Recruit
- Posts: 450
- Joined: Sat Oct 24, 2009 11:55 am
- antispam: No
- What year did the original Knight Rider start: 1982
Re: KR Rep for Sale
Hey, Sorry to hear that you decided to not finish the car. Sounds like you have everything except the tires and car pc. I would try to install the tires and rims, this may get more people looking at the car. PM me what you are looking to get for the car. I may know someone.
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
I'm sorry too but i really don't have the time to complete and it's a lot of money just sat there doing nothing at the moment.
The car has cost me well over $30k to date so i would be looking at sensible offers as it need very little to complete.
If anyone wants to view I am based near Orlando Florida
For more details or photographs, just email me - mark.takhar@gmail.com
Thanks
The car has cost me well over $30k to date so i would be looking at sensible offers as it need very little to complete.
If anyone wants to view I am based near Orlando Florida
For more details or photographs, just email me - mark.takhar@gmail.com
Thanks
- KoehlerIndustries
- Recruit
- Posts: 39
- Joined: Thu Jan 20, 2011 9:27 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: NY
Re: KR Rep for Sale
Sounds Awesome! What exaust did you get for it?
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
I went for the JBA system as to me it sounds great. It's deep when ticking over, loud but not unbearable when accelerating and pretty quiet when driving around 60-70 mph on the interstate.
I've heard other systems that are just crazy loud all of the time. Which may suit some people but wasn't for me.
I've heard other systems that are just crazy loud all of the time. Which may suit some people but wasn't for me.
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
A selection of photos!
Will take better ones later today
Will take better ones later today
- Attachments
-
- photo 1.JPG (38.91 KiB) Viewed 14087 times
-
- photo 2.JPG (40.06 KiB) Viewed 14087 times
-
- photo 3.JPG (30.43 KiB) Viewed 14087 times
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
A few More!
- Attachments
-
- photo 4.JPG (40.34 KiB) Viewed 14085 times
-
- photo 5.JPG (30.08 KiB) Viewed 14085 times
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
And more.....
- Attachments
-
- photo 1-1.JPG (30.31 KiB) Viewed 14082 times
-
- photo 2-1.JPG (27.75 KiB) Viewed 14082 times
-
- photo 3-1.JPG (30.26 KiB) Viewed 14082 times
-
- Volunteer
- Posts: 11
- Joined: Wed Jan 23, 2013 7:51 am
- antispam: No
- What year did the original Knight Rider start: 1982
Re: KR Rep for Sale
Where can I see the photos?
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
Just PM me your email and I will send photographs to you.
Or email me direct at mark.takhar@gmail.com
Or email me direct at mark.takhar@gmail.com
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
The other option if I am unable to sell it as a KR replica project is that i will take out the ORB, Scanner etc and sell them separately. I will sell the car as a GT500 replica.
I also purchased the 20" Shelby wheels which are still boxed as the came to me. They would be for sale too!
Anyone interested, please feel free to email me.
I also purchased the 20" Shelby wheels which are still boxed as the came to me. They would be for sale too!
Anyone interested, please feel free to email me.
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
It looks like i will be stripping it down and selling the parts.
I have the Orb from Joshua but no car pc, the scanner from creative indulgence, and the shelby wheels. All there items are brand new and i'm open to offers.
The Mustang will be sold as a GT500 rep.
Anyone interested, please contact me
I have the Orb from Joshua but no car pc, the scanner from creative indulgence, and the shelby wheels. All there items are brand new and i'm open to offers.
The Mustang will be sold as a GT500 rep.
Anyone interested, please contact me
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
Now on Ebay!
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
Guys i need to get this sold within the next 6 weeks. Any ideas?
Would it be better to take the Knight Rider bits off and sell it as a GT500 (KR) replica.
I can sell the scanner and orb at a later date but need to get the car and wheels (still brand new and in box) sold and out of the way
Would it be better to take the Knight Rider bits off and sell it as a GT500 (KR) replica.
I can sell the scanner and orb at a later date but need to get the car and wheels (still brand new and in box) sold and out of the way
Re: KR Rep for Sale
it may be better to sell it as a GT500 replica, instead of a knight rider clone. If u have the alcoa, i would sell them separately also because u may be able to get 3/4000 for them, if u have the 20x9 and 20x10 set up.MTAK wrote:Guys i need to get this sold within the next 6 weeks. Any ideas?
Would it be better to take the Knight Rider bits off and sell it as a GT500 (KR) replica.
I can sell the scanner and orb at a later date but need to get the car and wheels (still brand new and in box) sold and out of the way
"My wife asks me, why you do those burnouts? Well.....you do it for the kids, you know, Im not being immature. You just.....well you do it for the kids."
~Jay Leno
~Jay Leno
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
Yes, i have the Alcoa 20x9 & 20x10 set up. They are still sat in my living room boxed.
I think you are probably right and it would sell better as a GT500 replica.
Now comes the task of striping all the wiring out and converting back to normal.
I have the orb from Joshua which i will need to sell, if anyone is interested. Also the scanner from creative indulgence.
Thanks for the advice
I think you are probably right and it would sell better as a GT500 replica.
Now comes the task of striping all the wiring out and converting back to normal.
I have the orb from Joshua which i will need to sell, if anyone is interested. Also the scanner from creative indulgence.
Thanks for the advice
-
- Rookie
- Posts: 50
- Joined: Sun Feb 28, 2010 6:41 pm
- antispam: No
- What year did the original Knight Rider start: 1982
- Location: Florida
Re: KR Rep for Sale
Car and wheels are now listed on Ebay!
The car is $21,000
The car is $21,000