Page 37 of 42

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Mar 13, 2012 1:06 pm
by Pierre
alcoa mounted today


Image

Image

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Mar 13, 2012 3:13 pm
by BullittKnight
Congrats! they look awesome!

Are they the same size all around or did you get them staggard

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Mar 13, 2012 3:50 pm
by Pierre
thanks bro^^ ,9 front 10 rear the car has much more grip but are a little slower for now , a good tune and air filter will help^^maybe one day a supercharger, my dream lol

I also want to lower it but don't know if one inch is enough or if 1,5 si better without destroying the bumper on speed bump

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Mar 13, 2012 3:51 pm
by BullittKnight
thats awesome, I remembered how excited I was when I first had them put on.

congrats, car looks great!

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Mar 13, 2012 6:58 pm
by dayneknight
Looks great dude, seriously needs lowering, whats it going to be? Hero mode, attack mode or karr.

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Mar 13, 2012 9:11 pm
by lphill01
Looks great Pierre!

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Mar 13, 2012 11:56 pm
by Knight Racer
The car looks great.I don't own a replica but lowering that body would be havoc when it comes to speedbumps.I can't imagine that beautiful car getting all scratched up from the undercarriage outward.I live in Brooklyn,NY so speedbumps and potholes are a way of life here.Looks real nice!

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Mar 14, 2012 3:39 am
by Pierre
thanks a lot guys. Yeah there is a lot of speed bump in france too I thing we are the king of spped bump and rond point and some are like a wall so high they are .Maybe a drop of one inch would bi sufficient? I dont' know.
It s going to be a hero kitt If money allow me

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Mar 25, 2012 1:00 pm
by KoehlerIndustries
Pierre wrote:what are to correct tire pressure for the alcoa? to avoid the low pressure message

I just had my Alcoa Rims and tires put on last week and the shop said the Tire Pressure is set for 35 PSI.

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Mar 25, 2012 1:03 pm
by KoehlerIndustries
Anyone try lowering there Mustangs yet? I contacted Gaplin Auto Sports, they are the ones that did the KI3T for the pilot and said that the Ford Racing Lowering Springs are what they did to there KITTs. Just wondering If anyone has tried this way or another method. :)

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Mar 25, 2012 4:00 pm
by Pierre
I'll use ford racing cause they are officially licensed ford part

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Mar 25, 2012 5:02 pm
by lphill01
You guys might want to check out Velocity channel at 9:00 EST tonight. West Coast Customs is building a Mustang decked out with microsoft tech, including a HUD system. They're mating a '67 Mustang body to a '12 chassis.

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Mar 28, 2012 11:14 am
by BullittKnight
Hood is finally painted, pins installed. Now to lower her and install Joshua's orb.

I will probably change the front fascia next year...if we dont all die in December of 2012 :P

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Mar 28, 2012 12:45 pm
by Pierre
look great :good:

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Mar 28, 2012 9:19 pm
by krkitt1
WOW!! That looks great in green. Did you get the hood for the Shelby front end or for a reg. Mustang?

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Mar 28, 2012 9:34 pm
by BullittKnight
Thanks guys, the hood was for a GT. But there kis a fascia that will work with this hood. After your dash and Teds orb, my funds are short. I am lowering her hopefully next week, that will be $400 easy.

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Mar 29, 2012 2:18 am
by Pierre
yeah i know what you mean I can't do nothing to my car until next year

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Mar 29, 2012 9:21 pm
by KoehlerIndustries
Alcoa Rims are on! Looking into having it lowered this summer!

Re: Great New for KITT Mustang Replica Builders!

Posted: Sat Mar 31, 2012 11:39 am
by KoehlerIndustries
Image
Out of Storage for the Summer! KI3T Has come a long way in two years!
Image
ImageImage
Wheel Caps on Order. Now to work on the Hood Grilles, Lenses, Scanner!

Re: Great New for KITT Mustang Replica Builders!

Posted: Sat Mar 31, 2012 11:45 am
by KoehlerIndustries
Oh, And this was the before picture! (2 Years Ago!)
Image

Re: Great New for KITT Mustang Replica Builders!

Posted: Sat Mar 31, 2012 11:49 am
by KoehlerIndustries
Image
And at a car show at a Nursing Home Before the Alcoa Rims were put on! (Only 2 cars showed up!)

Re: Great New for KITT Mustang Replica Builders!

Posted: Sat Mar 31, 2012 2:01 pm
by Pierre
sooooooo sexyyyyyyy ride :D

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Apr 04, 2012 5:15 am
by StarCars
Hello guys n gals!
It's been awhile since I've posted but I'm back with many updates... and yes, my 08 Mustang is just about complete.
I only have a few things left to fix and I'm done.

MY biggest question is... I bought a juggling Orb for my dash piece and I'm trying to figure out how to mount it into
the dash? (I still have yet to attempt to remove the stock dash piece). So any help would be greatly appreciated.

Tao... I tried to download your zip file on "how to" take apart the stock dash, but the file said it was removed.
Can you email the file to me?
mikes_email2@yahoo.com

As for the Q&A on my car... I will say that I found my hood through VIS fiberglass on Ebay.. which costed $400 shipped.
It fits the standard/GT models, so you don't have to blow excess money on the GT500KR front end.
I also found a nice honeycomb grill for $75.. the only thing that is different, is that it still retains the stock driving lights.. however, I installed some 'cling on' tint to the lights, using a heat gun to mold it to the lights.
For the wheels.. I went with the 18" inch 2011 style pony wheels (closest to the SS wheels) and found a set for $400
on Ebay. (at the time SS wheels were $2K per set). So far I get compliments on the way the car looks.
I also had a metal-worker cut my stock springs for $100.. For the front springs he cut off 1 ring, and welded the bottom 4" inches to the perch (to keep them from popping out). And for the rear springs he cut 1 & 3/4 rings off.
The car sits and rides alot better, and with the 18" inch wheels I managed to retain some sidewall cushion.
(I will post some photo's here, or you can check them out on my www.Facebook.com/starcarsusa page)

Anyway, I look forward to any/all help that I can get.
Thanks in advance,
Michael

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Apr 04, 2012 6:07 am
by StarCars
Here are a few images of my 2008 Mustang GT (KR replica)

As I stated above, I went with the 18" inch wheels and the grill that retains the driving lights, but tinted them.
And also lowered the car a couple of inches.. added the SCT tune and K&N filter also. It runs wild now. 8)

A profile view after waxing, buffing and installing the snake emblems...
Image
Image

A profile view after installing the hood, fresh out of the paint booth...
Image

And a view of the scanner lenses installed...
Image

Still working on the hood vents and ordered the correct rear spoiler. Should have them done within the week.
Please, let me know what ya think. :wink:

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Apr 04, 2012 9:19 pm
by krkitt1
Hey Mike, I sent you a pm on Youtube.