Page 31 of 42

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Oct 02, 2011 9:02 pm
by krkitt1
I'm selling my scanner from my car. Anyone who wants to buy it, just email me.

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Oct 04, 2011 7:09 pm
by Knightphoenix1
Ok, I'm having trouble here. Does KITT have a GT500 spoiler or a V6 pony package spoiler? And does anyone have any ideas about front licenes plate mounting, for the states that require it? There is a company that makes a hide away plate mount but that might be hard with the lowness of the car. Cause here in Texas, the cops do not like you not having it ON THE FRONT BUMPER. Really need help here on the spoiler part.

thanks. :spmgo:

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Oct 04, 2011 9:05 pm
by krkitt1
Hey, It's a V6 Pony Package spoiler. On the lic plate frame, Ford does have one for the Shelby front end. We have two plates here in ILL but I didn't want to put the holes in the bumper, I don't have a front plate and now watch me get stoped.hehehehehe.

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Oct 04, 2011 10:32 pm
by lphill01
I've been running around without my front plate as well...

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Oct 05, 2011 5:00 pm
by Knightphoenix1
Cool thanks guys.

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Oct 06, 2011 12:22 am
by Kn1ghtboy
I've been doing the same with the license plate. I live in Texas & I don't have a license plate frame for my stang. I have it kinda stuck to the glass by the dash with this 2 way sticky glue. I've been pulled over & I've told them I'm not ruining my front fascia with an ugly license plate. I get warnings but that's all the state DPS officers do. In the city, the po po don't mind it since it's visible in the winshield.

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Oct 18, 2011 5:06 pm
by StarCars
Hello all! As few of you know me, I've built a few KI2T replica's... the most popular being the one I sold to Glen, whom changed it into KARR and performed the ski stunt at the original KRFest. Now that I've had the opportunity to attend
the last 2 years KRFest 2&3 (KRFest 3 with my KI2T replica & A-Team van), I've recently acquired an 08 Mustang GT.
I've managed to get a set of the 18" 2010-11 wheels that closely resemble the correctly used 20" ($2K set) wheels.
Needless to say, I'm happy as others' views of the car around here as well. I also picked up a rear GT500 spoiler (also via ebay) for $60 (granted I had to paint it).

Anyway, I know I've stated long in the past that I don't have much time to get online and post in the forums much,
but I've been reading and watching this thread... and I too am looking at buying the parts.
So my questions are...
1. Where can I go online (web url) to order the parts to make the Orb piece for my dash? (Tao, do you have a url?)
2. I've bought the LED scanner and built one to work on my KI2T.. however I'm not sure what the dimensions are on
the KI3T scanner bars. Can someone help tell me what they are?
3. This thread has far surpassed any thread I have ever seen... and most of the links to places (old) have become
expired.. So I ask, can some of you repost the sellers ID on Ebay where the items are expired after 90 days?

Any and all help is greatly appreciated.. Oh and one last thing... THANK YOU guys (and gals) for "Making A Difference". :wink: 8) :good:

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Oct 18, 2011 5:55 pm
by kitt2k
Image

Hello Mike, your friend John here. Hit me up on Facebook. As the owner of one of the most screen accurate KI3K Mustangs, I think I can help you out.

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Oct 24, 2011 11:56 am
by StarCars
kitt2k wrote:Image

Hello Mike, your friend John here. Hit me up on Facebook. As the owner of one of the most screen accurate KI3K Mustangs, I think I can help you out.
Thanks John. I almost didn't find this thread again. LoL

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Nov 06, 2011 8:45 am
by KoehlerIndustries
Sorry for my absence my fellow Knight Riders, I have been busy with alot in my personal life as well as making time for working on my KI3T replica. My outside conversion is almost complete. I have gone through the following changes so far since I have started the Replica Process- Front bumper, rear bumper, spoiler, side stripes, racing stripes, both in the Matte Black, Snake emblems on the fenders and the trunk emblem, and of coarse, the Trufiber Venom Hood with twist lock pins which Im sure we all agree is the best hood for the conversions so far. I have just ordered my Alcoa rims and waiting until after winter to have them put on. I recommend that if anyone is going with the Alcoa rims, you jump on it ASAP since they no longer make these anymore and whats left in stock at retailers is all thats left. I heard also that these Alcoa rims are popular with Corvette owners and they are going fast. I purchased mine at Champion Mustangs and I am very pleased. I thank you all for your information in helping me with my replica process and if any upcoming replica builders need any information, Im happy to assist along with everyone else here Im sure!

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Nov 06, 2011 11:35 am
by Pierre
i ordered my alcoa rims too from champion mustang,can't wait to get theme .

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Nov 06, 2011 7:35 pm
by GT500KR
To let you all know for those who are doing KI3T replicas, Shelby has discontinued the Alcoas

Unless Shelby produces their own Alcoa style wheel, the Alcoas are very limited now.

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Nov 07, 2011 7:36 am
by krkitt1
Shelby will not be making the SuperSnake rims themselfs, They are going with a new style of rim. Get them while you can. I was thinking of getting a extra 20X10 and 20X9, just in case. Right now, I'm getting the car ready for World Of Wheels. I need to make some of the props that KITT had to along with my display. Any close up pictures of any props would be greatful. Also, car show season is over here, KITT was in 12 shows and won 9 times. Not bad. We are also starting to look at houses back near Chicago so we can leave this place. One has a unfinish basement and it would be a great place for KITT's 29 Trophys. When is the chat room going to be back up, I miss it.

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Nov 07, 2011 9:03 am
by Kal-el4
last I heard man, it won't be....

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Nov 07, 2011 5:25 pm
by GT500KR
im part of the Shelby Community, Alcoa Wheels and Shelby do not have an agreement anymore. the Style Alcoa wheel wont be produced anymore, because that was exclusive for Shelby American. I have no clue what the New SuperSnake wheel looks like yet, because it hasnt been announced. The new wheel might be announced before the Shelby American 50th Anniversary Tour begins at the Detriot Auto Show in January


They will probably run with the Alcoas until they run out, so like i said the Alcoas will be limited because Shelby might buy up the remaining Alcoas from places like Champion Mustang(since they have an agreement with Shelby American) so they will be only available for GT500KR or SuperSnake owners, in case an customer rims gets bent or whatnot.

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Nov 09, 2011 4:35 pm
by romeoknight
what's up guys im new to this :lol: ...im working on my mustang knight rider replica i was wondering if u guys could help me out with some stuff i want the voice box from the knight rider 2008 movie can anyone help? :good:

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Nov 14, 2011 4:44 pm
by Knightphoenix1
Hey guys, I've been trying to find something on how to change the color on my cluster to blue. Right now their green and the car was special ordered those its a base model mustang it has the my color changing cup holders and floor lights. So any ideas on what I can do?

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Nov 14, 2011 7:27 pm
by krkitt1
Knightphoenix1 wrote:Hey guys, I've been trying to find something on how to change the color on my cluster to blue. Right now their green and the car was special ordered those its a base model mustang it has the my color changing cup holders and floor lights. So any ideas on what I can do?
Hey, Does your car have My Color? If so, then you can go to your setup with the car in park, it will give you three different grids to change colors to the way you want. I have mine to match my blue under the dash pad lights from KITT. I also have the cup holder and floor set on blue too.
romeoknight wrote:what's up guys im new to this :lol: ...im working on my mustang knight rider replica i was wondering if u guys could help me out with some stuff i want the voice box from the knight rider 2008 movie can anyone help? :good:
Send me a e-mail and I will let you know on the ORB and also on some other stuff for your car. Mine is about 80% done.

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Nov 14, 2011 8:42 pm
by Knightphoenix1
I would think it does. If my cup holders and floor light up. But I don't have the botton on the center console.

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Nov 15, 2011 12:56 am
by lphill01
The two questions to answer on Mycolor- Do you have a 6-gauge cluster with the message center, and do you have the Info/Setup/Reset buttons (which are normally used to reset the tripmeter) to the left of the cig lighter in the dash? If you have those, then there's a good bet you have Mycolor.

Push Setup twice, which will bring you to the mycolor menu on the message center. Tap Reset to cycle through the differant Mycolor preset colors (blue's included), or cycle to the custom mycolor adjustment page (in, park or neutral) In that page, you can cycle adjust red blue and green hues on scales of 5 to create the 125 color combos.

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Nov 15, 2011 4:26 pm
by Knightphoenix1
I only have the 4 gauge cluster. And I don't have the bottons to the left of the cig lighter. But my cup holder and floor light up.

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Nov 15, 2011 7:40 pm
by dayneknight
Why are you selling your scanners?

Re: Great New for KITT Mustang Replica Builders!

Posted: Fri Nov 18, 2011 10:09 pm
by KoehlerIndustries
Question. I just bought my Alcoa Supersnake Rims and was wondering what the tire sizes would be for the 20x9s and 20x10s. Im hearing all sorts of sizes on other Mustang sites but since we all have our KI3T replicas V6s or GTs, you all would know the best route! And any recommendations on a tire make?

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Nov 22, 2011 6:43 am
by taoworm2323
That's a really good question!
Anybody want answer this one?
Ted what size tires do you have on your KITT's rims?

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Nov 22, 2011 11:04 am
by Pierre
normaly 255 20 35 front 275 20 35 rear