Page 30 of 42

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Aug 11, 2011 3:23 am
by Pierre
for the air airbag I put two ,2 ohm resistor so the light does not come on +you keep the other airbag working .For the horn it still work but you take the wire from the modul fixed just benath the stock wheel .My dad did that he's an electrician

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Aug 11, 2011 8:21 am
by BullittKnight
Hi Blackthorntk I dont think I am going to be able to do a full replica, since my color is Highland Green. But if I can do certain things it will resemble it a little more. Pierre, thank you for the info. So I will need 2 resistirs for the air bags and not just one? And could you explain a little more about the module I am not too sure I understand what I need to do for the horn to work. Thank you so much for helping!!!

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Aug 11, 2011 11:42 am
by Pierre
yes two resistor because there is two airbag connector.
Don't know how to explain it but it's a little module with wire such cruise control and horn all at the same place it is a part of the rotary ring that pivot when you turn the steering wheels i'll tray to find pic

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Aug 11, 2011 11:44 am
by BullittKnight
Pierre,
thank you!! I really want to put this on, but If I cant have a horn then theres no point

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Aug 11, 2011 1:15 pm
by Pierre
you can proof mine work go to a local autoshop or electrician if you d'ont have the knowledge to to it^^

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Aug 17, 2011 9:58 pm
by krkitt1
New Scanner will be here in 2 weeks!!! Can't wait to get it installed for the Big RT66 Car Show Weekend. Hey Taoworm, Give me a call. I really need your help. KITT is being a bitch to me........

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Aug 18, 2011 7:14 am
by Knightphoenix1
Is the scanner from champion mustang.com any good? If not where could I get a show quality one?

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Aug 18, 2011 12:23 pm
by darthknight72
Hey Taoworm..I was just checking out Champion Mustang and they are discontuing thier Knight 3000 Product line.I was just wondering if you were still making parts for KITT conversions...Thanks.

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Aug 18, 2011 8:44 pm
by KoehlerIndustries
krkitt1, did you get my PM about the Dash Board Pannels? 8)

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Aug 18, 2011 9:27 pm
by krkitt1
No, I didn't see it. Resend it if you can.
Thanks Ted

Re: Great New for KITT Mustang Replica Builders!

Posted: Fri Aug 19, 2011 1:11 am
by blackthorntk
BullittKnight wrote:Hi Blackthorntk I dont think I am going to be able to do a full replica, since my color is Highland Green. But if I can do certain things it will resemble it a little more. Pierre, thank you for the info. So I will need 2 resistirs for the air bags and not just one? And could you explain a little more about the module I am not too sure I understand what I need to do for the horn to work. Thank you so much for helping!!!
you could always make a green KITT. People told me i should just make a red one and use white lights in front witch wold match due to Hawaii laws cant have red or blue up front. But I would love to have dual lights where it can change color basically as I would use red when at car shows if i ever get that far or just to show off in the neighborhood but not in public view. other then that i would flash the white ones when ever i drive about heh. good luck with ur stuff.

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Aug 21, 2011 5:51 am
by Tiger Warrior
Hey guys, I'm trying to order the new SVT rims (Preferably 18', even though KITT is supposed to have 20"s) and I can't seem to find a place that has them online. Obviously I may not be looking at the right place, but if anyone can help me out on this one, I'd greatly appreciate it. Also, if the rims are in black, that would look awesome on my Shadow KARR. For those who have not seen my KARR, I got a video uploaded on You tube a while back whn I had the ICE LED lights. Thanks very much and hope to hear from you soon.

From an KRO Operative deployed in Korea:



Hector
aka "Tigerforhire"

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Aug 21, 2011 3:03 pm
by lphill01
The 18 inch Shelby Alcoa rims are restricted to KR only and aren't available for sale. If you end up doing the 20 inch, Google "Super Snake wheels" or "Shelby Alcoa" and you should get some hits. You could also try championmustang.com. Ford had a stock set that was similar on the 2010 model that Bill used and looked pretty sharp.

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Aug 21, 2011 4:23 pm
by krkitt1
Buy them dirrect from Shelby. I got two from them and it was great to deal with them. I got the run a round from two other places. If you have to buy them one at a time, Shelby is the best place to get them.

Re: Great New for KITT Mustang Replica Builders!

Posted: Sun Aug 21, 2011 9:40 pm
by blackthorntk
yeah I plan on having the 20 inch in back and 19 inch in front and yes buy them from shelby it might be expensive their but they are easier to handle then other places that give you runaround stories. the only thing I'm debating on now is wither I'll go with the chrome silver or chrome black. I know in pilot episode they had the chrome black supersnake rims for battle mode and I kinda want to get to a battle mode kitt as much as possible.

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Aug 22, 2011 9:29 am
by KoehlerIndustries
About the rims gentleman, since I will be buying mine next year hopefully, do you go 20x9 in the front and 20x10 in the rear, OR do you go 20x9 all the way around so you can rotate the tires. Does anyone have any imput on this or can share what they have done and there XP with this. Thank You.

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Aug 22, 2011 9:32 am
by KoehlerIndustries
krkitt1, tried PM you again. I must not be doing this right. Computers should be more like KITT, and do it for you! :evil: And can anyone help me figure out how to post pictures? I can t figure it out! :evil:

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Aug 22, 2011 9:11 pm
by krkitt1
KoehlerIndustries wrote:krkitt1, tried PM you again. I must not be doing this right. Computers should be more like KITT, and do it for you! :evil: And can anyone help me figure out how to post pictures? I can t figure it out! :evil:
Hey I did get it today. Sorry, it's been crazy at work. I will send you the info on the lights later tonight, I have to check and get the person I got mine from. As for the Rims, I went with the 20X9 in the front and 20X10 in the rear. It just fills the rear Q panels better but the bad thing is tha I can't rotate the tires. Matt has the 20X9 all the way around. If you can, take a look at his car and then mine. Mine are only on for the summer so I may only put 7500 miles on them a year. I'm hoping to buy a winter car so KITT can stay in the garage this winter.

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Aug 22, 2011 11:43 pm
by blackthorntk
yeah Krkitt1 that's what I'm going to do it just looks better fortunately I'm going to have to buy spares for each size just in case

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Sep 15, 2011 5:30 pm
by Knightphoenix1
Devon we have a problem. The Alcoa super snake 20" rims are being discontinued! Any thoughts to help all of us that still need to build KI3T?

Re: Great New for KITT Mustang Replica Builders!

Posted: Fri Sep 16, 2011 10:55 pm
by krkitt1
I would check with Shelby first, then Ebay and then all the Mustang stores on the web. I had to buy one at a time because of the price. I would say it would be best to get all 4 at once. I went with the 20X10 in rear and 20X9 in front.

Re: Great New for KITT Mustang Replica Builders!

Posted: Mon Sep 19, 2011 9:28 pm
by blackthorntk
there are people who can custom make rims any way you like it. You may want to check with that sort of source if it comes to the point you can no longer find the rims. This would be the only other way to do it. If I recall having them made would also be cheaper to make then the actual alcoa super snake rims. I had a look into this awhile back and the guys i spoke too down in Hawaii told me they could do it and even make it spin out if I wanted that effect. Although having the svt logo in the middle they couldn't do but I did ask if they could put the two yin and yang style horse symbol there instead they told me yes yet I would have to have someone to customize that for me to give to them to add it in.

Re: Great New for KITT Mustang Replica Builders!

Posted: Thu Sep 22, 2011 2:10 pm
by Pierre
I wonder in the show sometime the wheels are staggered sometime does they always use 10 in rear or sometime 9 with 10 tire sitze I mean 275 35 20 on 9 instead of 10

Re: Great New for KITT Mustang Replica Builders!

Posted: Tue Sep 27, 2011 8:25 pm
by krkitt1
Looking for the Steering wheel and hub. What do I need to get the airbag light to stay off and also will the other airbags still work.

Re: Great New for KITT Mustang Replica Builders!

Posted: Wed Sep 28, 2011 5:58 am
by Pierre
momo hub for mustang will find them when taping momo hub mustang on google .You'll need two 2 ohm resistor in place of the airbag connector to shut of the airbag light and to keep the others in function